Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Pocket?
Gate installation in Pocket runs about $2,400 to $4,200 for a typical residential driveway swing gate, including the operator, safety sensors, and access control. A manual walkway gate is far less, usually $450 to $1,200 installed. High-cycle commercial and HOA operators for multi-unit driveways climb from $6,500 into five figures.
Those ranges reflect what we actually quote in Pocket, not national averages. What you pay depends mostly on gate size, material, and how much site work (concrete, electrical, grading) your driveway needs before a single hinge goes in. A professional gate installation in Pocket is a single project that touches several parts of your property, so the quote usually breaks down into more moving pieces than a garage door or fence job does.
We’re gate specialists, not generalists. That means we diagnose your site first and only recommend replacement parts when repair truly won’t last. Call (833) 620-5971 for a free estimate and we’ll walk your driveway, check the power situation, and give you a real number.
Gate Installation Cost Breakdown (2026)
Here’s how a Pocket gate project typically prices out. These are ranges, not fixed bids. Your final number moves with gate width, material, and site conditions.
| Line item | Typical range (Pocket, 2026) |
|---|---|
| Manual swing gate (walkway or single driveway leaf) | $450 – $1,200 installed |
| Residential automatic swing gate system (gate + operator + sensors) | $2,400 – $4,200 |
| Residential automatic slide gate system | $3,200 – $6,000 |
| Commercial / HOA high-cycle operator (multi-unit drive) | $6,500 – $15,000+ |
| Gate operator (brand unit, supplied separately) | $900 – $2,200 residential; $2,500 – $6,000 commercial |
| Access control (keypad, intercom, or phone-app entry) | $350 – $900 |
| Safety sensors / photo-eye pair | $180 – $450 |
| Electric run to the gate location (conduit, trench, low-voltage) | $1,200 – $3,500 |
| Concrete pads / footings for gates, posts, or operator | $600 – $2,500 |
| Site prep and grading adjustment | $400 – $1,800 |
| Old gate removal and haul-away | $150 – $400 |
What pushes cost up: a wide or heavy leaf that needs a stronger operator, sloped driveways that force extra concrete, a long trench run to reach the gate from your panel, and commercial-grade high-cycle duty ratings. What keeps cost down: a manual gate with no operator at all, a short electrical run, and a flat, clear driveway where footings sit easily.
Because we service nine competing gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, we can spec the operator that fits your site and budget instead of one we prefer to sell. That brand-agnostic approach carries straight into installation. If you’re curious how we think about repair versus replacement on existing gates, our main service overview covers the whole scope.
What Affects Gate Installation Pricing in Pocket
Pocket is an established neighborhood with mature lots and older driveways, and those features shape a gate quote more than a national cost calculator captures. Here’s what moves the number:
- Gate size and material. A 4-foot walkway gate and a 16-foot double driveway gate are two different jobs. Wood, ornamental steel, and aluminum each change both the gate cost and the operator needed to swing or slide it.
- Power access at the gate line. If your panel is on the far side of the house or the run has to cross a hardscape, upping the electrical to the gate can add real money. In Pocket we often see driveways where the nearest workable power is 40-plus feet from the gate location.
- Site grading and the driveway slope. A gate on a slope needs cleaner footings and, for a swing gate, careful hinge placement so the leaf clears the grade through its full arc. Sloped and uneven driveways are common in this part of the city and add concrete work.
- Manual versus electric. Adding an operator, safety sensors, and access control can roughly double the cost of a manual build, but it’s also what most Pocket homeowners with driveway gates are actually after.
- Operator duty cycle. A household gate that opens a few times a day and a multi-unit HOA or commercial drive with constant traffic need different operators. High-cycle commercial units cost more because they’re built to last through far more open-and-close cycles.
- Access control and integration. Keypads, intercoms, phone-app entry, and vehicle loop detectors each add line items. A property manager who needs to grant and revoke tenant access will pay for the controls that make that possible.
One thing we watch closely: older Pocket properties sometimes have a gate already in place that’s been limping along on an undersized operator. If the existing gate hardware is sound, sometimes the smartest move is a new operator and safety setup rather than a whole new gate. We’ll tell you which side you’re on after we diagnose it.
How to Save on Gate Installation
You can’t cut corners on a gate that has to keep your driveway secure and open reliably, but there are honest ways to bring the number down:
- Reuse a sound gate where you can. If your existing gate leaf and posts are still solid, replacing just the operator, sensors, and access control can cost far less than a full new gate. We’re happy to tell you which path makes sense.
- Skip the operator if a manual gate fits your life. A manual swing gate avoids the entire electric and operator line items. If you don’t need automatic entry, this is the biggest single saving.
- Consolidate electrical and concrete work. Handling the power run and footings as one coordinated part of the install is cheaper than bringing in separate trades on separate visits.
- Pick a straightforward access-control setup. A basic keypad or key-fob entry costs considerably less than a full intercom and phone-integration system. Add the fancy controls later if you need them.
- Get a real, itemized estimate before you buy a gate. The most expensive mistake is buying the wrong gate or operator and paying to fix it. We diagnose first and only replace what won’t last.
None of us can drop a hard quote on a page like this, but a walk-through gives you an exact number. Call (833) 620-5971 for a free estimate and we’ll size the project honestly. If you’re weighing a repair on an older gate instead, our team also handles full gate installation and electric gate repair across the neighborhood.
FAQs – Gate Installation Cost
How much does it cost to install a driveway gate in Pocket?
A residential automatic driveway gate in Pocket typically runs $2,400 to $4,200 installed, including the operator and safety sensors. A manual driveway gate on its own is usually $450 to $1,200. Call (833) 620-5971 for an exact quote – estimates are free.
Is it cheaper to repair a gate or install a new one in Pocket?
Repair is usually cheaper when the gate structure and posts are sound and only the operator, sensors, or hardware have failed. A typical repair on an existing gate costs a fraction of a full install, which is why we diagnose first and only recommend replacement when the repair won’t hold. Call (833) 620-5971 and we’ll tell you which path fits your gate.
How much is an automatic gate operator in Pocket?
A residential gate operator runs about $900 to $2,200 for the unit itself, depending on brand and duty rating; commercial high-cycle operators climb from $2,500 up. Because we service nine brands, including LiftMaster, FAAC, BFT, and DoorKing, we spec the operator that fits your gate rather than pushing one brand. Call (833) 620-5971 for a quote.
Do I need electrical work for an automatic gate, and how much does it add?
Yes, an automatic gate needs a low-voltage power run to the gate location, which typically adds $1,200 to $3,500 in Pocket depending on distance and how much trenching or conduit is needed. If your panel is close and the run is short, you’ll sit at the low end. Call (833) 620-5971 and we’ll scope the electrical with the rest of the install.
How much does a commercial or HOA gate system cost in Pocket to install?
Commercial and HOA high-cycle gate installations in Pocket generally start around $6,500 and can run past $15,000 for multi-unit drives with heavy traffic and full access control. The number depends on duty cycle, lane width, and the access-control setup your property manager needs. Call (833) 620-5971 for a site-specific estimate.
Why go with a gate specialist
A gate install touches the gate itself, the operator, the sensors, the electrical, and the access control, and a problem anywhere in that chain leaves you with a gate that sticks, stalls, or won’t open at all. That’s where a specialist matters. We work on gates every day, from the motor to the hinge, on both manual and electric systems, residential and commercial. It’s not a side service we picked up between fence jobs. From repair through full Gate Installation services, you keep one partner as the system ages.
When a job calls for it, we also bring the whole system back into alignment: a gate that’s already up but misbehaving can often be fixed, and a gate that’s past saving gets a clean new install on the same footing. Either way, you get brand-agnostic advice and a diagnosis you can trust.
Ready for a real number? Contact Gatehouse Gate Repair or call (833) 620-5971 for a free estimate. We’ll walk your Pocket property, scope the gate, operator, and power together, and give you an itemized quote with no surprises.
Pricing reflects the Pocket market as of 2026. Gatehouse Gate Repair offers free estimates – call (833) 620-5971.
What Our Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Alma Ramirez"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Ruben Morales"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
- Danielle Delaney