Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Pocket Homeowners
A new driveway gate in Pocket typically costs $2,800 to $9,500 installed, depending on the gate material, operator type, and other Gate Installation pricing factors, and whether you’re replacing an existing setup or starting from scratch. Most installations take one to two days on site, and we quote every job in writing before any work begins. Gatehouse Gate Repair is led by Glenn Pacheco, and our technicians work exclusively on gates, which means you’re not getting a fencing crew learning gate automation on your property.
We serve Pocket, Greenhaven, and the surrounding Sacramento neighborhoods with a focus on getting the gate right the first time. If you’re weighing repair versus replacement, call (833) 620-5971 and we’ll give you an honest read on what your existing gate needs.
Automatic Gate Installation
Automatic Gate Installation means adding a motorized operator, safety sensors, and access controls to a gate you can open without leaving your car. It’s the right move when you want to stop rolling down your window in the rain to wrestle a manual gate, or when a property manager needs keypad and remote access for multiple tenants. In Pocket, most automatic gate setups on a single driveway run $4,200 to $9,500, including the operator, safety edges, and programming.
We start by checking your gate’s weight, swing path, and the condition of the hinges and posts. A motor on a badly hung gate will eat itself in a year, so we correct the mechanical side before we bolt on the automation. Then we match the operator to the gate, not the other way around.
Operator Matching by Gate Weight and Cycle
A light aluminum pedestrian gate needs a different operator than a 400-pound steel driveway gate, and a commercial gate cycling 300 times a day needs something heavier still. We calculate duty cycle and weight first, then choose the operator. That’s why our recommendation holds up over years of daily use.
Safety Systems Included, Never Optional
Every automatic gate we install in Pocket includes photo eyes or contact edges that stop and reverse the gate if something is in the path. California code requires entrapment protection, and we wire and test it as part of the job. Skipping this step is how people get hurt and property owners get sued.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Installation Services
Gate Installation Services cover the full scope of putting in a new gate: assessing the site, setting posts, hanging the gate, wiring the operator, and programming entry devices. Whether you’re replacing a rusted manual gate or adding a gate where none existed, you’re looking at $2,800 to $9,500 for Pocket Gate Installation, with the spread driven by gate size, material, and whether you need electrical work.
Gatehouse Gate Repair handles the entire job in-house, including the concrete work, the low-voltage wiring, and the programming. You’re not coordinating a fencing contractor, an electrician, and a locksmith. One crew, one written quote, one accountable vendor from the first hole to the final remote.
Full Turnkey Work, Not Partial
Some companies will hang a gate and leave you to find someone else for the operator. We don’t. Every Gate Installation Services job we quote includes the electrical run, the operator, the safety devices, and the programming unless you specifically ask us to phase the work.
Post-Set Curing and Alignment
The most common failure we see in Pocket is a gate that sags six months after install because the posts shifted before the concrete cured. We brace and level everything, and we don’t hang the gate until the footing has set properly. A properly set post means a gate that opens cleanly a decade later.
Electric Gate Installation
Electric Gate Installation is the wiring-heavy side of gate work: running conduit, pulling low-voltage line from your panel, mounting the operator, and tying in access controls like keypads, remotes, and intercoms. For most Pocket homes, a complete electric gate install runs $4,500 to $9,500, with the power run and operator accounting for a meaningful chunk of the quote.
We’re comfortable with the electrical side because we do it every day, and a big part of Glenn Pacheco’s approach is treating the low-voltage and line-voltage work as part of the gate system, not a bolt-on. A gate that opens electrically but trips a breaker twice a week isn’t finished, and we don’t call it finished until it runs reliably.
Power Run and Conduit Done Right
The distance from your electrical panel to the gate location affects cost more than most homeowners expect. A 100-foot conduit run costs more than 30 feet, and we quote that line item clearly. We pull the wire, make the connections, and verify voltage at the operator before we call the job done.
Access Control Integration
Keypads, phone-based entry, vehicle sensors, intercoms in a multi-tenant situation all plug into the electric side of your gate. We program what you want and walk you through using it. You’ll have codes for family, temporary codes for contractors, and a remote in every car.
Driveway Gate Installation
Driveway Gate Installation replaces or adds a gate across your vehicle entry, which in Pocket means everything from a modest single swing gate on a residential lot to a 20-foot sliding gate on a larger property near the river. Most Pocket driveway gates land between $3,500 and $8,500 installed, and the biggest variables are gate width, material, and automation.
We measure the driveway width, check the grade, and look at where the gate needs to land when open. A swing gate needs room to arc; a slide gate needs a clear track off to the side. The wrong geometry means a gate that clips a car or a wall, and that mistake is baked in at the planning stage. We don’t make it.
Swing vs. Slide for Your Driveway
If your driveway slopes upward from the street, a swing gate may drag or need a high-lift hinge set. If space is tight, a slide gate may be the answer because it moves parallel to the fence line rather than swinging into the driveway. We’ll recommend based on your actual site, not a preference for one style.
Gate Weight and Hardware Selection
A heavy steel driveway gate on light hinges is a repair call waiting to happen. We spec hinges, casters, and track components rated for the actual gate weight plus a margin. That’s what keeps a Pocket driveway gate closing true for years instead of sagging by the second season.
Sliding Gate Installation
Sliding Gate Installation uses a gate that rolls sideways on a track instead of swinging, which is often the best choice in Pocket when you have a short or sloped driveway and no room for a swing arc. A new sliding gate setup typically runs $4,000 to $9,500, and most of that is the gate’s carriage, track, and the operator that drives it.
A slide gate is a mechanical system: track, rollers, guide posts, and the frame all have to align or the gate chatters and binds. We set the track level, anchor the guide posts, and adjust the rollers so the gate moves with one hand before we ever connect a motor. The automation is only as good as the slide it sits on.
Track and Roller Alignment Discipline
Slide gates fail when the track settles or the rollers wear unevenly, and that starts with a bad install. We pour a level track base and use adjustable rollers. If the gate drifts or hesitates a year down the road, the fix is an adjustment we can make in an hour, not a rebuild.
Commercial-Grade Slide Gates
For HOAs, apartment complexes, and commercial properties in the Pocket area and our Gate Installation in Meadowview service area, slide gates hold up better than swing gates under high traffic. We install operators rated for continuous cycling and build the track to commercial spec, so the gate doesn’t stall during morning rush.
Gate Opener Installation
Gate Opener Installation mounts and programs the motorized drive that moves your gate, and it’s the core of any automated gate setup. In Pocket, you can expect to pay $1,200 to $3,500 for the opener itself, installed and programmed, depending on the operator’s duty rating and your access control needs.
We work on LiftMaster, FAAC, BFT, and Linear openers, and we know these units’ failure patterns and install quirks because we service all of them. That means we don’t spend your job learning a new manual. It also means we recommend the opener that fits your gate’s weight and cycle count, not whatever happens to be on our truck.
Duty Cycle: The Number Most People Ignore
A homeowner who opens the gate five times a day needs a different opener than an HOA gate cycling hundreds of times daily. We match the operator’s duty cycle to your actual usage. Undersize the operator and you’ll be replacing the motor every couple of years.
Programming and Remote Setup
We pair your remotes, set your keypad codes, and adjust the open and close limits so the gate stops exactly where it should. You’ll leave the install with every remote working and a quick demo of the controls. No mystery buttons, no half-configured opener.
Gate Fabrication
Gate Fabrication is when a standard off-the-shelf gate won’t fit your opening and you need a gate built to your exact dimensions, material, and design. In Pocket, custom fabrication adds real cost, and you should plan for $6,000 to $12,000 or more for a fully custom steel or aluminum gate built and finished for your property.
Some driveways are wider than stock gates. Some homeowners want a specific look that matches the house. That’s where fabrication comes in. We coordinate the build with local metal fabricators we trust, spec the frame and hinges, and handle the install and automation so the whole project comes together as one gate, not a patchwork of vendors.
When a Stock Gate Won’t Work
If your driveway opening is 14 feet, a 12-foot stock gate leaves a gap wider than your car. If you want a modern horizontal-bar design, you’re not getting that from a catalog. Fabrication closes those gaps, and we’ll tell you honestly whether it’s needed or whether an adjustable stock gate will do the job for less.
Fabrication Quality Checks
Before a fabricated gate ships to your Pocket property, we check the weld quality, gate weight, and hinge spacing against the operator spec. A beautiful gate that weighs twice what the motor can handle is a liability. We catch that before it’s hanging in your driveway.
Brands We Service
We work on nine major gate automation brands, which puts us in a different position than a company that installs one brand and services nothing else. On the install side, we’re factory-trained on LiftMaster, FAAC, BFT, and Linear equipment, and that depth means we know which operator belongs on which gate without guessing.
LiftMaster dominates residential driveway gates in Pocket, and we know their swing and slide operators inside out. FAAC and BFT are common on European-style gates and higher-end homes in the Pocket and Greenhaven area, and Linear shows up often on commercial barrier arms in Sacramento. When you have a mixed-brand property or an existing opener you want to keep, our brand-agnostic approach means we fix and upgrade what works rather than selling you a rip-and-replace. Whether you have LiftMaster, FAAC, BFT, Linear, or another make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Your gate shudders or binds mid-travel. That’s almost always a mechanical problem, not a motor problem: a bent hinge, a shifted post, or a track out of level. If you keep running it, the strain transfers to the operator and you turn a $400 repair into a $2,000 replacement.
- The gate reverses for no reason. When a gate starts closing and then backs up with nothing in the way, the safety edges or photo eyes may be misaligned or failing. It’s a safety system, and an unreliable one means the gate may not stop when it should.
- You hear grinding from the operator. Grinding is a gear or chain problem inside the motor unit, and it won’t heal itself. Running the opener until it seizes usually damages the arm and the gate frame too.
- The gate sits visibly crooked or drags on the ground. A sagging gate is a hinge and post problem, and it’s throwing the whole system out of alignment. The longer it runs crooked, the more parts wear unevenly and the more expensive the eventual fix.
- Your gate won’t hold closed, or won’t open enough to get a car through. That’s a security problem as much as a convenience problem. A gate that won’t reliably close leaves your property open, and a gate that won’t open traps you out of your own driveway. Either way, it’s a today problem.
Our Process, Step by Step
- 1
Site walk and measurement. We come to your Pocket property, measure the opening, check the grade, look at the existing posts and power access, and listen to how you actually use the gate. The quote is based on what we see, not a guess over the phone.
- 2
Written quote, line by line. You get a breakdown of the gate, hardware, operator, electrical work, and labor. No lump-sum mystery number. We walk through it with you so you understand what you’re paying for before anything is ordered.
- 3
Prep work and post set. If the job needs new posts, we dig, set, brace, and level them, then let the concrete cure properly. If we’re reusing existing posts, we verify they’re square and load-rated for the new gate before we proceed.
- 4
Gate hang, operator mount, and wiring. We hang the gate, mount the operator, pull the wire, and connect the safety devices. Every connection is tested under load, and the gate is cycled repeatedly to catch binding or misalignment before we finish.
- 5
Programming, walkthrough, and cleanup. We program the remotes and keypads, show you how everything works, hand you a written summary of what was installed, and haul away the old gate and packaging. You’re left with a working gate and a clean driveway.
How Much Does Gate Installation Cost in Pocket?
A typical gate installation in Pocket runs $2,800 to $9,500, with most residential driveway gates landing in the $3,500 to $7,000 range. A basic manual swing gate on existing posts sits at the low end, while a custom fabricated slide gate with a high-cycle operator pushes toward the top. A full automatic gate installation with new posts, a power run, safety edges, and a LiftMaster or FAAC operator is where most of our Pocket quotes cluster.
What moves the price: gate width and weight, whether we’re setting new posts or reusing existing ones, the distance from your electrical panel to the gate, the operator’s duty cycle, and access control complexity. A keypad and two remotes cost less than a phone-based system with an intercom for a multi-unit property.
The best way to avoid overpaying is to get a line-item quote and ask what each line covers. If a bid seems low, check whether it includes the electrical run, safety devices, and programming. Those omissions are how low bids become expensive change orders. Our estimate is free, it’s in writing, and the price we quote is the price we work to. We don’t start until you’ve approved the numbers.
Our Service Area Near Pocket
Gatehouse Gate Repair serves Pocket and the surrounding Sacramento neighborhoods, including Greenhaven, Elk Grove, West Sacramento, Florin, Meadowview, and Laguna. We also cover Vineyard, Valley Hi, Oak Park, and Rancho Cordova for scheduled installs. If you’re near Pocket but not sure you’re in range, call (833) 620-5971 and ask. Most installs in the immediate Pocket and Greenhaven area can be scheduled within a few business days of the site walk.
Serving Pocket, CA – Our Local Coverage Area
We’re based in the Pocket area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Pocket
Gate installation is the process of setting a gate and its hardware, and when you want automation, wiring and programming the operator. It includes posts, hinges, the gate itself, safety devices, and access controls. For Pocket homeowners, a full install typically takes one to two days on site, and we handle everything except fence work that falls outside the gate opening.
Most residential gate installations in Pocket take one to two days on site. A straightforward operator install on an existing gate can be done in a day, while new post-setting with curing time adds a return visit. Custom fabrication extends the timeline by a week or more depending on the fabricator’s queue.
Expect $2,800 to $9,500 for a complete gate installation, with automatic driveway gates typically between $4,200 and $8,500. The main cost drivers are gate material, width, operator type, and the electrical run. Call (833) 620-5971 for an exact quote based on your driveway.
Yes. We work on LiftMaster, FAAC, BFT, Linear, and five other major gate brands, so your existing opener doesn’t have to be scrapped just because one company only sells their own line. We’ll assess what you have and recommend repair or replacement based on what actually makes sense for your Pocket gate.
If your gate is stuck open or stuck closed and it’s a safety or security problem, call (833) 620-5971. We do emergency gate calls in Pocket and the surrounding area, and we’ll tell you over the phone whether it’s a problem that can wait until morning or something we should address the same day.
Yes. The equipment you receive carries a manufacturer’s warranty, and our workmanship is backed so that if a hinge loosens or a connection fails because of how it was installed, we come back and make it right. The specific warranty terms depend on the gate and operator you choose, and we’ll spell them out in your written quote.
Clear the driveway area where we’ll be working and make sure we can reach your electrical panel. If you have pets or children, keep them inside while we’re moving the gate and running the operator. We’ll handle the rest: permits if needed, digging, concrete, wiring, and cleanup. The most useful thing you can do is be available for a 10-minute walkthrough at the end so we can show you the controls.
Schedule Your Gate Installation Service in Pocket Today
If you’re ready for a new gate or want an honest assessment of the one you have, call (833) 620-5971. We’ll schedule a free site walk in Pocket, give you a written line-item quote, and walk you through every option before any work begins. Gate specialists, not generalists. Glenn Pacheco and the team are ready when you are.
Written by Glenn Pacheco, Owner at Gatehouse Gate Repair, serving Pocket and the greater Sacramento area.