Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in Pocket?
Gate access control in Pocket, CA typically runs $650 to $1,400 for a single-entry system on an existing gate, and $2,800 to $6,500 for a full multi-entry setup with intercom, keypad, and remote entry hardware. If your gate operator already works and you’re only adding credentials like a keypad, card reader, or phone app, most Pocket homeowners land between $450 and $950. Costs climb when the gate needs a new operator, new wiring runs, or commercial-grade controls for an HOA or multi-unit property.
We’re Gatehouse Gate Repair, and gates are the only thing we work on. That matters for pricing: we’re not a fencing contractor or a garage door company adding access control as a sideline. Every part we quote, we’ve installed before, across nine major brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you want the full picture of what we install and service, start at our home page, and for the specifics of local systems see Gate Access Control in Pocket.
Key Takeaways
- A keypad or credential upgrade on a working gate: $450 to $950
- A full single-entry access control system: $650 to $1,400
- Multi-entry, intercom, or commercial setups: $2,800 to $6,500
- Wiring, trenching, and operator replacement drive most of the price swing
- Free estimates, so you get a real number before any work starts: call (833) 620-5971
Gate Access Control Cost Breakdown (2026)
Here’s where the money goes on a Pocket job. These are the ranges we quote most often, broken out by line item so you can see what a real system costs piece by piece instead of one lump number.
| Line Item | Typical Cost Range |
|---|---|
| Keypad or entry pad (wired or wireless) | $180 – $420 installed |
| Card reader or proximity reader | $350 – $800 installed |
| Intercom or video entry station | $600 – $1,900 installed |
| Phone-app or smart access module | $250 – $650 installed |
| Safety sensors and photo-eye pair | $150 – $350 installed |
| Loop detector (vehicle detection) | $400 – $950 installed |
| New swing gate operator (residential) | $1,200 – $2,600 installed |
| New slide gate operator (residential) | $1,500 – $3,200 installed |
| Commercial high-cycle operator | $3,500 – $8,500 installed |
| Low-voltage wiring and conduit (per run) | $250 – $900 |
| Trenching for buried wire (per foot) | $6 – $18 |
| Battery backup for the operator | $200 – $500 installed |
| Labor for controller programming and setup | $150 – $400 |
The biggest swing factor is whether you’re adding controls to a gate that already opens, or starting from a manual gate with no operator at all. Adding a keypad to a working LiftMaster or FAAC operator is a short job: a few hundred dollars, done the same visit. A manual gate on a Pocket property that never had power run to it is a different project. Now you’re looking at an operator, a wiring run from the house or panel, possibly trenching across a driveway, and a controller to tie it together. That’s where you get into the multi-thousand dollar range.
Brand matters less than people expect. FAAC and BFT operators sit at similar price points to LiftMaster for comparable residential duty cycles, and DoorKing commercial controls cost more because they’re built for high-cycle commercial traffic, not because the brand commands a premium. Because we work across all nine brands, we’re not steering you toward one manufacturer. We quote the fix that fits your existing system.
What Affects Gate Access Control Pricing in Pocket
Pocket is a residential neighborhood tucked into the greenbelt south of the American River, and the properties here have some local quirks that show up on almost every quote. Here’s what moves the number.
- Distance from power to the gate. Many Pocket homes have the garage or main panel set well back from the street, and the gate sits far from any power source. A long low-voltage run adds hundreds of dollars in wire and conduit, and if the run crosses a landscaped bed or driveway, trenching drives it up further. We measure the actual distance before we quote, because guessing here is how estimates go wrong.
- Gate type and weight. A light residential swing gate is cheap to automate. A heavy ornamental or solid-panel slide gate needs a higher-torque operator, heavier hinges, and more robust safety hardware. Older gates on Pocket properties built in the 1980s and 1990s sometimes need hinge and track work too, and a gate that drags will wear out a new operator fast.
- Single entry vs. multi-entry. A driveway gate with one entry point is straightforward. Properties with a pedestrian gate, a vehicle gate, and a side yard service gate need multiple control points, which multiplies both hardware and wiring.
- Access method you choose. A basic keypad is the budget option. Add card readers for a property manager tracking who comes and goes, an intercom so you can screen visitors, or app control so you can open the gate for a delivery, and the price climbs with each layer.
- Safety and code compliance. Automatic gates need photo-eye sensors and, on many installations, loop detectors so the gate won’t close on a vehicle or a person. These aren’t optional extras for us. They’re part of a compliant install, and they add to the total.
- Commercial duty cycle. HOA entrances and multi-unit properties open dozens or hundreds of times a day. That requires a commercial operator rated for the cycle count, plus heavier controls. A residential operator pushed into commercial duty fails early, so we won’t spec one there to save a few hundred dollars.
One local note worth flagging: Pocket’s tree canopy and the moisture that comes off the river corridor mean gates near the greenbelt see more debris in tracks and more corrosion on exposed hardware than a gate in a drier, more open part of the city. That shortens the life of cheap sensors and controllers. We tend to recommend sealed, weather-rated components here, which cost a little more up front and last longer.
How to Save on Gate Access Control
There’s no reason to pay for a full system if a targeted upgrade gets you what you need. These are the moves that actually lower the bill without cutting corners.
- Keep a working operator and upgrade the controls. If your gate already opens reliably, adding a keypad and a smart module costs a fraction of a new system. Don’t replace an operator that’s doing its job.
- Fix mechanical problems before they eat the electronics. A gate that drags, sags, or slams shut puts strain on the operator and the controller. Repairing a hinge or track now is cheap; replacing a burned-out control board later isn’t. We diagnose first and replace only when a repair won’t last.
- Bundle the wiring run. If you’re already trenching for power, run the control wiring in the same trench. Doing it in two passes doubles the digging and the cost.
- Choose the access method you’ll actually use. A homeowner who only needs to open the gate for family and deliveries doesn’t need a commercial card reader system. Match the controls to the real traffic.
- Get a written estimate before work starts. Free estimates mean you can compare real numbers instead of guessing. Call (833) 620-5971 and we’ll walk the property and quote it properly.
We do free estimates, and we’ll tell you honestly when a repair will outlast a replacement and when it won’t. That’s the whole reason we diagnose before we quote: a stuck gate on a Pocket property is usually a fixable problem, not a reason to buy a new system.
FAQs – Gate Access Control Cost
How much does a gate keypad cost in Pocket, CA?
A keypad installed on an existing automatic gate in Pocket runs $180 to $420, depending on whether it’s wired or wireless and how far it sits from the controller. If your gate has no power or operator yet, the keypad is only part of the project and the total climbs into the full access-control range. Call (833) 620-5971 for an exact quote. Estimates are free.
Is it cheaper to repair or replace gate access control?
Repair is cheaper in most cases. A failed keypad, sensor, or control board is usually $150 to $600 to fix, versus $650 to $1,400 for a new single-entry system. Replacement only makes sense when the controller is discontinued, the wiring is failing throughout, or the operator is at the end of its life. We’ll tell you which side of that line you’re on before you spend a dollar.
How much does a full gate operator and access control install cost in Pocket?
A complete new install, operator plus controls, runs $1,800 to $3,800 for a residential swing or slide gate with standard access hardware. Commercial-grade setups for HOA or multi-unit properties in Pocket start around $3,500 and go up from there based on traffic and entry points. Call (833) 620-5971 and we’ll quote your specific gate.
Can you come out and quote my gate the same week?
Yes. We schedule free estimates for Pocket and the surrounding areas, and most quotes are scheduled within the same week you call. Have your gate type, brand if you know it, and a rough idea of what you want the system to do. That’s enough for us to give you a real range before we arrive.
Do you service the access control brand I already have?
Most likely, yes. We work on nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers everything from a residential Mighty Mule swing gate to a commercial DoorKing entry system. Because we service competing brands, we diagnose the system you have instead of steering you to a brand we’d rather sell.
Pricing reflects the Pocket market as of 2026. Gatehouse Gate Repair offers free estimates – call (833) 620-5971.
What Our Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Jennifer Kowalski"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Alma Ramirez"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Ruben Morales