Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pocket, CA
Gate installation in Pocket usually involves long, wide driveway swing gates on ranch-home lots, and the work starts with getting the post footings right in clay soil. Most of the calls we take here are for gates that sag, scrape, or won’t latch after a winter of wet soil and a summer of dry heat. We’re Gatehouse Gate Repair, a dedicated gate company serving Pocket since 2018, and we handle everything from the motor to the hinge. If your gate needs work, call (833) 620-5971 for a free estimate.
Why Pocket Homes Are Different
Pocket is a mid-century Sacramento neighborhood where single-story ranch homes sit on generous lots, and those lots translate into gates that are wider and heavier than what you’d find in tighter south-city subdivisions. A typical Pocket driveway gate might span 12 to 16 feet, built from wood or chain-link, hung on posts that were set decades ago in the area’s expansive clay soil. That soil is the central fact of gate work here. Through the hot, dry Central Valley summer, clay shrinks and pulls away from posts, loosening them. Then winter rains arrive, the clay swells and heaves, and posts that were barely holding on kick outward. The gate drops, drags on the driveway, and the latch no longer lines up. We see this cycle every year. By late spring, the “drag and scrape” season is in full swing, and most of the work is re-hanging and re-squaring gates on posts that need resetting rather than simple hinge replacements. Mature trees add another variable: roots push against post footings over time, shifting them even without seasonal movement. If you live in Pocket and your gate scrapes the driveway in April, the post has almost certainly moved, not the hinges.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Pocket Services
Two services account for most of the calls we take in Pocket: mechanical gate repair and electric gate repair. Here’s what each one involves here.
Gate Repair in Pocket
Most mechanical gate repair in Pocket comes down to posts, hinges, and alignment. The oversized wood and chain-link swing gates common on Pocket’s ranch lots put real strain on aging posts, and after a few seasons of clay-soil movement, those posts lean. We re-set posts in concrete, re-square the gate frame, replace worn hinges and latches, and rebuild wood gate frames that summer heat has warped. If a gate is dragging but the post is sound, the fix might be as simple as a hinge adjustment. If the post has rotted below grade, it gets replaced. See Gate Repair in Pocket for the full scope of what we do.
Electric Gate Repair in Pocket
Electric gate repair in Pocket typically involves operators, actuators, safety edges, and the low-voltage wiring that connects them. The seasonal post movement that affects mechanical gates also affects electric ones: when a post shifts a few degrees, the gate’s travel arc changes, and an operator that worked fine in January can stall or overload in May. We diagnose the whole system, from the control board to the actuator to the hinges, and we repair nine major brands including LiftMaster, FAAC, and BFT. See Electric Gate Repair in Pocket for details.
Gate Installation in Pocket
Gate installation in Pocket starts with one question: what’s the soil doing at the post locations? Because Pocket sits on expansive clay that heaves in winter and shrinks in summer, we set post footings deeper than code minimums and use concrete that can handle the movement. A new gate here needs to survive not just this year, but the full seasonal cycle. Whether you’re replacing a sagging wood swing gate or upgrading to an automated system, we quote the full job upfront, including the gate, posts, hardware, and any operator or access control you want. Most installations in Pocket are completed within one to two weeks of the quote. For the full range of what we install, see Gate Installation.
Automatic Gate Installation
Signs you need it
You’re opening and closing your gate by hand multiple times a day, or you want controlled access to your driveway without leaving your car.
What it costs in Pocket
Automatic gate installation in Pocket typically runs $3,245 to $7,950 depending on gate size, operator type, and whether new wiring is needed.
How we do it
We assess the gate’s weight and travel, install the operator and safety edges, run low-voltage wiring, and program the system to open and close reliably on Pocket’s sometimes uneven driveways.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is sagging past repair, or you have no gate and want to secure a driveway that’s wider than the standard single-car opening.
What it costs in Pocket
A new driveway gate installation in Pocket ranges from $1,680 for a basic single swing gate to $5,940 for a wider or automated setup.
How we do it
We measure the opening, assess the soil at the post locations, set posts in concrete at the proper depth, hang and square the gate, and install hardware that holds alignment through Pocket’s wet winters and dry summers.
What Gate Installation Costs in Pocket
| Item | Typical range in Pocket |
|---|---|
| Manual swing gate install, single | $600 – $1,840 |
| Manual swing gate install, double | $1,240 – $3,180 |
| Automatic gate operator install | $1,180 – $2,640 |
What pushes price up in Pocket? Gate width, wood species, operator brand, and how much excavation the clay soil requires at the post holes. Every job is priced on a written quote, agreed before we start.
How long does gate installation take in Pocket?
Most Pocket gate installations take one to three days on site. Concrete post footings need time to cure before we hang the gate and finalize alignment, which can extend the calendar time to about a week.
Do you handle the whole installation, including the operator and wiring?
Yes. We install the gate, set the posts, mount the operator, run the low-voltage wiring, and program the system. One crew handles the entire job, so you’re not coordinating between a fence company and an electrician. Call (833) 620-5971 for a free estimate.
Brands We Service in Pocket
We work on your brand, not one we’re trying to sell you. In Pocket, we service LiftMaster, FAAC, BFT, and Linear operators regularly, and we keep common parts for these systems on our trucks. Brand-agnostic diagnosis means we repair what’s there when repair will last, and we only recommend replacement when it makes sense. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pocket, CA
| Service | Typical range in Pocket |
|---|---|
| Mechanical gate repair | $175 – $420 |
| Electric gate operator repair | $235 – $620 |
| Actuator arm replacement | $295 – $780 |
| Control board replacement | $320 – $890 |
| Safety sensor or photo eye replacement | $155 – $365 |
| Gate post reset or replacement | $210 – $510 per post |
| Manual swing gate installation, single | $600 – $1,840 |
| Manual swing gate installation, double | $1,240 – $3,180 |
| Automatic gate operator installation | $1,180 – $2,640 |
| Complete automatic gate installation | $3,245 – $7,950 |
In Pocket, the two biggest price movers are post condition and gate width. Wide gates on compromised posts cost more because the post work is the labor-intensive part, and Pocket’s clay soil means we sometimes excavate deeper than expected to get a stable footing. Whatever the job, the price is quoted and agreed before any work starts. No surprises on the invoice.
Neighborhoods We Serve in Pocket
We work throughout Pocket and the surrounding south Sacramento area. Gates here follow the same pattern: ranch-era lots, wide driveway openings, and posts that have been in the ground since the Nixon administration. We’re typically able to schedule most Pocket jobs within a few business days.
- Pocket proper
- Greenhaven
- Meadowview
- Valley Hi
- Oak Park
Service Area – Cities Near Pocket
Gatehouse Gate Repair serves Pocket and the surrounding south Sacramento neighborhoods. If you’re in Greenhaven, CA, Meadowview, CA, Valley Hi, CA, or Oak Park, CA, we’re close by and handle the same gate work there as we do in Pocket.
Serving Pocket, CA – Our Local Coverage Area
We’re based in the Pocket area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pocket
We schedule most Pocket gate repairs within a few business days. Emergency calls for a gate stuck open or closed are prioritized when they affect security or access. Call (833) 620-5971 and we’ll give you an honest answer on the next available slot.
Most residential gate installations in Sacramento County don’t require a permit if the gate meets height and setback rules. For automated gates, electrical work must meet code. We can tell you during the estimate whether your specific project needs anything from the city.
Yes. The newer stucco infill homes in Pocket often have different gate styles than the original ranch homes, sometimes sliding or automated systems rather than swing gates. We work on both manual and electric gates, residential or commercial, across the full neighborhood.
If your gate is sagging, scraping, or stuck in Pocket, call Gatehouse Gate Repair at (833) 620-5971 for a free estimate. We’re gate specialists, not generalists, and we’ve been serving Pocket since 2018.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30–60 min.
- 4You approve before work beginsNothing starts until you say go.
What Pocket Customers Say
"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Maya Sharma"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Jennifer Kowalski"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Alma Ramirez